1-60 Orc

[ImHuko]

If you are willing to change things yourself, you can go into the Editor, make a SpotFishing profile and add waypoints for your own path.  Load up that beside the 1-60 Orc/Tauren profile, and copy/paste the waypoints of your path, change the HotSpot number to your number of spots,  add HotSpot infront of X= and delete the spaces in the Spotfishing code and add a ;, then save and restart bot.  New path will work.

For example my 20-23 section went from:

[Step10]
min=20
max=23
MobIDs=33193|3821
HotSpots=4
HotSpot1=1364.976807;-2191.490723;91.970917
HotSpot2=1362.916992;-2125.453125;92.375198
HotSpot3=1411.391602;-2046.896851;94.944756
HotSpot4=1445.516968;-1958.208984;98.460098

to

MobIDs=33193|3821
HotSpots=15
HotSpot1=1309.59;-2323.23;94.78
HotSpot2=1346.11;-2325.61;102.14
HotSpot3=1378.8;-2335.3;100.63
HotSpot4=1421.91;-2306.81;95.18
HotSpot5=1486.86;-2319.97;93.43
HotSpot6=1504.41;-2275.21;95.54
HotSpot7=1499.05;-2231.82;93.34
HotSpot8=1492.32;-2228.77;93.87
HotSpot9=1398.89;-2261.38;90.05
HotSpot10=1359.48;-2221.13;93.15
HotSpot11=1357.94;-2212.42;93.63
HotSpot12=1363.71;-2149.68;94.67
HotSpot13=1398.84;-2075.1;94.15
HotSpot14=1384.23;-1976.51;109.7
HotSpot15=1408.68;-2037.96;95.64

I wouldn't suggest using that path as its an example and wasn't actually tested thoroughly.  Possibly too hard for characters not fully heirloomed.

[lexmaster]

Just thought I'd share my feedback after testing this with a Orc Warrior from level 1 - 20.
It started out good and first 12 levels were good, after 12 my character started getting stuck on rocks/trees every 8 minutes or so and he also began chasing "Barren Vultures" (Flying birds) And since he was a warrior he couldn't attack them and just followed them around until i manually told him to stop and had to restart the bot or he would do the same thing. ( Happened at least 5 times)
Now at level 20 in Ashenvale I simply cannot grind anymore because the only thing my character does is get stuck on a fence to the first horde camp there, kills one mob and then gets stuck so I have to manually un-stuck him. Rinse and repeat.

[Venificus]

I have been running this bot on a new orc warlock and i must say i LOVE it!  i've had to do some level tweaks here and there for survivability as i am rather squishy at the time.  My only thought is that my lock isn't herbing at all...  I have the box in the options checked for Do Herbing and i have the gather radius at 150 for land and air (not that i can fly yet, but just in case...)  I would like to be able to level my herbalism a little bit while i am grinding, but it just doesn't seem to want to cooperate...  is this a problem with the profile or is it more of a general bot scripting problem?  If there is an easy fix, i would love to hear it!

thanx
Ven

[Wownk1]

Does it have to be an orc, or is this waypoint based?

[chickendinner]

I heard that it should work very well with a Nightelf Rogue.

Thank you very much for the profile!

[chickendinner]

Grinded my way up to level 43 and walked all the way to tanaris. Here I encountered a major problem:
Bots starts fine and kills Blisterpaw Hyena ID 5426, then he continues untill he arrives at a corpse of a Glasshide Basilisk. The toon tries to kill them but since zhey are dead it does nothing else.

Und un auf deutsch: Hab meinen Jäger in den Düstermarschen mit Krokos auf 43 gebracht, alles super. Danach ist er bis nach Tanaris geschwommen. Nicht so toll, aber auch damit kann ich leben.
In Gadgetzan angekommen läuft er los, killt die ersten Hyänen, bis er an eine Leiche eines Basilisken kommt, den nimmt er ins Visir und versucht die Leiche anzugreifen, aber das geht natürlich nicht. Also steht er nur rumm und versucht die Leiche des Basilisken zu töten und macht nicht weiter.
Irgendwelche Vorschläge, wie man das umgehen kann?

Danke

I had the same problem. I found a very easy solution for me. In the file:
Ich hatte das selbe Problem und eine sehr einfache LKösung gefunden:

...[Step13]
min=43
max=45
MobIDs=5426|5419
HotSpots=46
HotSpot1=-7092.451;-3600.959;9.760579...

I simply deleted the id 5419. Ich habe die ID 5419 gelöscht:

...[Step13]
min=43
max=45
MobIDs=5426
HotSpots=46
HotSpot1=-7092.451;-3600.959;9.760579...

And it worked fine. Und das hat funktioniert.

[Mrto]

My char just moves around a little bit and do not attack any mobs, when he's like 20 yards away from the mob he is bugging and just take 1 step at the time and nevers attacks, any idea what's wrong?

[Aoreth]

Stonetalon mountais seems to bug rly badly, bot is getting stuck in about 15secs. :<

[edw_ro]

I am testing this, I will post bugged spots.

HotSpot2=1135.881226;-4866.623047;21.202530

[johnnydumas]

I understand this may not be a very constructive feedback (apologies, apologies) but I'm trying to use this one for a lvl12 Goblin. Poor little greenie just doesn't know what to do after leaving orgrimmar.
Any wise computer gurus out there have experienced this problem?
Thanks in advance for any reply

[Foursh]

Bei mir ist das Problem, dass der Bot immer etwas anhält wenn ihn ein mob angreifft.. und wenn das nicht äußerst merkwürdig ist wenn jemand als anhält xD

Desweiteren wenn ich stop drücke auf dem kleinen Tool gibt der n scheiß drauf und mach munter weiter lol

und dazu kommt noch, dass der Orc nicht wirklich kürschert, obwohl ich den haken drin habe

Super Bot dennoch!

[pedro]

can i use this profil for bloodeff leveling ?

[morgan120]

i tested this profile 1-10 worked great. realized it would work for my tauren warrior. Prot spec. but the bot keeps attempting to use Execute and Victory rush? any way i can set it to use certain skills? and the bot takes FOREVER! after a kill to loot then run away?

[telcy]

take a look in the warrior custom class section: http://mmocrawlerbots.com/forum/warrior/

[spid12]

i get everytime a wow error once my lv 6 shaman orc wants attack the mobs

can you fix it ?